Air Suspension Control Module
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
Lower drivers window. Turn ignition switch to OFF position and then back to RUN. Exit vehicle and close all doors. Allow vehicle to vent (lower) to kneel height (this should take approximately 30 seconds). Connect NGS tester to DLC. Select correct vehicle year and model. Select 2WAS_CAL1 SUSP/EVO module. Select SAVE CALIBRATION VALUES (STORE RIDE HEIGHT) in scan tool menus. A warning message should appear, press TRIGGER to pass warning message. Press TRIGGER to change INITIALIZATION from OFF to ON. Calibration is now complete. Remove NGS tester from vehicle.