LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1490 (Module Configuration System) >> General Procedures >> Programmable Module Installation >> Using the Worldwide Diagnostic System (WDS) When the Original Module is Available
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using the Worldwide Diagnostic System (WDS) When the Original Module is Available

WARNING: This page is about a different car, the 2006 Mercury Mariner and 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS and ID the vehicle as normal.
  2. From the Toolbox icon, select and highlight Module Programming and press the check mark.
  3. Select and highlight Programmable Module Installation.
  4. Follow the on-screen instructions, turn the ignition key to the OFF position, and press the check mark.
  5. Install the new module and press the check mark.
  6. Follow the on-screen instructions, turn the ignition key to the ON position, and press the check mark.
  7. The module configuration is complete.
  8. Test the module for correct operation.
scientia non olet · About LEMON Manuals