Speed Control DTCS

SPEED CONTROL ACTUATOR DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTCs	Description	Source	Perform Test
B1318	Low Ignition Voltage During Speed Control Operation	Speed control actuator	Go To PINPOINT TEST L: DTC B1318 - LOW IGNITION VOLTAGE DURING SPEED CONTROL OPERATION .
B1342	ECU is Defective	Speed control actuator	CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new speed control actuator. Refer to SPEED CONTROL ACTUATOR . CLEAR the DTCs. REPEAT the self-test.
C1109	Throttle Did Not Return to Idle After Self Test	Speed control actuator	Go To PINPOINT TEST K: DTC C1179 - EXCESSIVE CABLE SLACK IN SPEED CONTROL CABLE, DTC C1109 - THROTTLE DID NOT RETURN TO IDLE AFTER SELF-TEST .
C1126	Command Switch Stuck for 2 Minutes or Longer	Speed control actuator	Go To PINPOINT TEST H: DTC C1126 - COMMAND SWITCH STUCK FOR 2 MINUTES OR LONGER .
C1127	Deactivator Switch Stuck Open	Speed control actuator	If the vehicle is equipped with stability assist, Go To PINPOINT TEST I: DTC C1127 - DEACTIVATOR SWITCH STUCK OPEN (VEHICLES WITH STABILITY ASSIST) . If the vehicle is not equipped with stability assist, Go To PINPOINT TEST J: DTC C1127 - DEACTIVATOR SWITCH STUCK OPEN .
C1179	Excessive Cable Slack in Speed Control Cable	Speed control actuator	Go To PINPOINT TEST K: DTC C1179 - EXCESSIVE CABLE SLACK IN SPEED CONTROL CABLE, DTC C1109 - THROTTLE DID NOT RETURN TO IDLE AFTER SELF-TEST .
U1027	Missing or Invalid Throttle Message	Speed control actuator	Go To PINPOINT TEST M: DTCS U1027, U1041, U1051 AND U1059 .
U1041	Missing or Invalid Vehicle Speed Message	Speed control actuator	Go To PINPOINT TEST M: DTCS U1027, U1041, U1051 AND U1059 .
U1051	Missing or Invalid Brake Message	Speed control actuator	Go To PINPOINT TEST M: DTCS U1027, U1041, U1051 AND U1059 .
U1059	Missing or Invalid PRNDL Message	Speed control actuator	Go To PINPOINT TEST M: DTCS U1027, U1041, U1051 AND U1059 .