LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2006 >> Freestar Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Drive Sprocket/Turbine Shaft >> Disassembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Drive Sprocket/Turbine Shaft: Disassembly

  1. Remove the drive sprocket/turbine shaft seal and O-ring.
    • Remove the drive sprocket/turbine shaft O-ring.
    • Remove the drive sprocket/turbine shaft seal.
      Fig 1: Locating Drive Sprocket/Turbine Shaft Seal And O-Ring
      G04661391Courtesy of FORD MOTOR CO.
  2. Inspect the bearing race for wear. If the bearing is worn a new drive sprocket/turbine shaft will need to be installed.
    Fig 2: Locating Bearing Race
    G04661392Courtesy of FORD MOTOR CO.
  3. Remove the turbine shaft front seal.
    Fig 3: Locating Turbine Shaft Front Seal
    G04661393Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals