Inspection and Verification

This section provides step-by-step module configuration procedures. Carry out the programmable module installation (PMI) procedure in this article when another article directs to carry out configuration or when DTCs from the below list are present:

DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B2477	Module Configuration Failure	Air suspension module Driver door module (DDM) Instrument cluster Lighting control module (LCM) Restraints control module (RCM) Variable assist power steering (VAPS) module	CARRY OUT PMI. REFER to Programmable Module Installation .
B2477	Module Configuration Failure	Fire suppression module	REFER to FIRE SUPPRESSION SYSTEM article.
B2900	VIN Mismatch	Fire suppression module	REFER to FIRE SUPPRESSION SYSTEM article.
P0602	Powertrain Control Module Programming Error	Powertrain control module (PCM)	CARRY OUT PMI. REFER to Programmable Module Installation .
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P0630	VIN Not Programmed or Incompatible - ECM/PCM	Fire suppression module	REFER to FIRE SUPPRESSION SYSTEM article.
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0300	Internal Control Module Software Incompatibility	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	Air suspension module	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	DDM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	Instrument cluster	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	VAPS module	CARRY OUT PMI. REFER to Programmable Module Installation .
U2051	One or More Calibration Files Missing / Corrupt	Anti-lock brake system (ABS) module	REFER to VEHICLE DYNAMIC SYSTEMS article.
U2051	One or More Calibration Files Missing / Corrupt	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .