LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Expedition RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Disassembly And Assembly Of Subassemblies >> Intake Manifold Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Assembly: Disassembly

  1. Remove the 4 bolts, the vibration damper and the throttle body (TB).
  2. Remove the 4 bolts and the fuel rail.
  3. Remove the fuel injector-to-fuel rail locking clips and separate the fuel injectors from the fuel rail.
    • Discard the 2 O-ring seals from each fuel injector.
  4. Remove the charge motion control valve (CMCV) rod locking clips.
  5. Remove the stud bolt, the 2 bolts and the CMCV.
  6. Remove the 2 bolts and the PCV heater element.
    • Discard the O-ring seal.
  7. Remove the engine noise shield insulator from the intake manifold.
scientia non olet · About LEMON Manuals