Module Communications Network DTCS

COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC	Description	Perform Test
U0001	High Speed CAN Communication Bus Off	The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0073	Control Module Communication Bus Off	The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0073	Control Module Communication Bus Off	The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool.
U0100	Lost Communication With ECM/PCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test A .
U0100	Lost Communication With ECM/PCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test A .
U0100	Lost Communication With ECM/PCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test A .
U0100	Lost Communication With ECM/PCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test A .
U0100	Lost Communication With ECM/PCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test A .
U0101	Lost Communication With TCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test B .
U0101	Lost Communication With TCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test B .
U0101	Lost Communication With TCM	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test B
U0102	Lost Communication With Transfer Case Control Module (4x4CM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test E .
U0102	Lost Communication With Transfer Case Control Module (4x4CM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test E .
U0114	Lost Communication With Four-Wheel Drive Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test E .
U0121	Lost Communication With Anti-Lock Brake System (ABS) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test C .
U0121	Lost Communication With Anti-Lock Brake System (ABS) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test C .
U0121	Lost Communication With Anti-Lock Brake System (ABS) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test C .
U0122	Lost Communication With Vehicle Dynamics Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test F .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0140	Lost Communication With Body Control Module (GEM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test H .
U0151	Lost Communication With Restraints Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test D .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test G .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test G .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test G .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test G .
U0155	Lost Communication With Instrument Panel Cluster (IC) Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test G .
U0159	Lost Communication With Parking Assist Control Module (PAM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test S .
U0159	Lost Communication With Parking Assist Control Module (PAM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test S .
U0164	Lost Communication With HVAC Control Module (EATC)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test I .
U0208	Lost Communication With Seat Control Module	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test P .
U0230	Lost Communication With Rear Gate Module (LTM)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test T .
U0244	Lost Communication With Running Board Control Module (PRB)	CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, go to Pinpoint Test R .