Starting System DTCS

PASSIVE ANTI-THEFT SYSTEM (PATS) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Source	Action
B1213	Anti-Theft Number of Programmed Keys is Below Minimum	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B1342	ECU is Faulted	Instrument Cluster	CLEAR the DTCs. CARRY OUT the instrument cluster self-test. If DTC B1342 is retrieved, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER .
B1600	PATS Key Transponder Signal is Not Received - Damaged Key or Non-PATS Key	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B1601	PATS Received Incorrect Key-Code From Ignition Key Transponder (Unprogrammed PATS Key)	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B1602	PATS Received Invalid Format of Key-Code From Ignition Key Transponder (Partial Key Read)	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B1681	PATS Transceiver Module Signal is Not Received (Damaged, Not Connected or Damaged Wiring)	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B2103	Defective Transceiver	Instrument Cluster	INSTALL a new PATS transceiver. REFER to ANTI-THEFT - PATS .
B2141	NVM Memory Failure (No Target ID Stored in Instrument Cluster)	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B2431	Transponder Programming Failed	Instrument Cluster	REFER to ANTI-THEFT - PATS .
B2477	Module Configuration Failure	Instrument Cluster	CONFIGURE the instrument cluster. REFER to MODULE CONFIGURATION . CLEAR the DTCs. REPEAT the self-test. If DTC B2477 is retrieved, INSTALL a new instrument cluster, REFER to INSTRUMENT CLUSTER .
U1900	CAN Communication BUS Fault	Instrument Cluster	DTCs B2141 and U2510 should be present along with U1900. REFER to ANTI-THEFT - PATS . If not, REFER to MULTIFUNCTION ELECTRONIC MODULES .
U2510	CAN - Invalid data for Vehicle Security	Instrument Cluster	REFER to ANTI-THEFT - PATS .
U2511	CAN - Data Mis-Match (Receive data does not match expected)	Instrument Cluster	REFER to ANTI-THEFT - PATS .