Vehicle Dynamic Systems
ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1317 | Battery Voltage High | ABS Module | Go to Pinpoint Test A . |
| B1318 | Battery Voltage Low | ABS Module | Go to Pinpoint Test A . |
| B1342 | ECU is Faulted | ABS Module |
NOTE:
If other DTCs are present, repair them before installing a new module. CLEAR the DTCs. RETRIEVE the DTCs. If DTC B1342 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module
. REPEAT the self-test. |
| C1093 | Traction Control Disable Switch Circuit Failure | Instrument Cluster | Go to Pinpoint Test H . |
| C1095 | ABS Hydraulic Pump Motor Circuit Failure | ABS Module | Go to Pinpoint Test B . |
| C1096 | ABS Hydraulic Pump Motor Circuit Open | ABS Module | Go to Pinpoint Test B . |
| C1115 | ABS Power Relay Output Short Circuit to Battery | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1115 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1145 | Wheel Speed Sensor RF Input Circuit Failure | ABS Module | Go to Pinpoint Test C . |
| C1155 | Wheel Speed Sensor LF Input Circuit Failure | ABS Module | Go to Pinpoint Test C . |
| C1165 | Wheel Speed Sensor RR Input Circuit Failure | ABS Module | Go to Pinpoint Test C . |
| C1175 | Wheel Speed Sensor LR Input Circuit Failure | ABS Module | Go to Pinpoint Test C . |
| C1185 | ABS Power Relay Output Circuit Failure | ABS Module | CLEAR all DTCs. If DTC C1185 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1194 | ABS Outlet Valve Coil LF Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1194 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1198 | ABS Inlet Valve Coil LF Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1198 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1210 | ABS Outlet Valve Coil RF Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1210 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1214 | ABS Inlet Valve Coil RF Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1214 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1222 | Wheel Speed Mismatch | ABS Module | Go to Pinpoint Test D . |
| C1233 | Wheel Speed LF Input Signal Missing | ABS Module | Go to Pinpoint Test D . |
| C1234 | Wheel Speed RF Input Signal Missing | ABS Module | Go to Pinpoint Test D . |
| C1235 | Wheel Speed RR Input Signal Missing | ABS Module | Go to Pinpoint Test D . |
| C1236 | Wheel Speed LR Input Signal Missing | ABS Module | Go to Pinpoint Test D . |
| C1242 | ABS Outlet Valve Coil LR Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1242 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1246 | ABS Outlet Valve Coil RR Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1246 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1250 | ABS Inlet Valve Coil LR Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1250 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1254 | ABS Inlet Valve Coil RR Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1254 is retrieved again, INSTALL a new ABS module. INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1329 | ABS Valve Outlet Coil Over RF Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1329 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1330 | ABS Valve Outlet Coil Over LR Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1330 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1331 | ABS Valve Outlet Coil Over RR Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1331 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1332 | ABS Valve Outlet Coil Over LF Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1332 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1333 | ABS Valve Inlet Coil Over RF Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1333 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1334 | ABS Valve Inlet Coil Over LR Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1334 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1335 | ABS Valve Inlet Coil Over RR Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1335 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1336 | ABS Valve Inlet Coil Over LF Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1336 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1404 | Traction Control Valve Rear Circuit Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1404 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1446 | Brake Switch Circuit Failure | ABS Module | Go to Pinpoint Test E . |
| C1527 | ABS TC Valve Inlet Coil Over Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1527 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1531 | ABS TC Valve Outlet Coil Over Temperature | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1531 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1730 | Reference Voltage Out of Range (+5 V) | ABS Module | If any other DTC(s) are present, DIAGNOSE those DTC(s) first. CLEAR all DTCs. DRIVE the vehicle. If the DTC is still present, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| C1958 | ABS TC Valve Outlet Coil Failure | ABS Module | CLEAR all DTCs. DRIVE the vehicle. If DTC C1958 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CARRY OUT the self-test with the brake pedal not applied. |
| U0073 | CAN Bus Off - Transmit Error | ABS Module | REFER to MODULE COMMUNICATIONS NETWORK . |
| U1900 | CAN Communication Bus Fault - Receive Error | ABS Module | REFER to MODULE COMMUNICATIONS NETWORK . |
| U2011 | Module Transmitted Invalid Data | ABS Module | VERIFY powertrain control module (PCM) configuration. If PCM is not correctly configured, CONFIGURE the PCM. If the PCM is correctly configured, REFER to MODULE COMMUNICATIONS NETWORK . |
| U2050 | No Application Present | ABS Module | CONFIGURE the ABS module. REFER to MODULE CONFIGURATION . CLEAR the DTCs. RETRIEVE the DTCs and VERIFY successful module configuration. If DTC U2050 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CLEAR the DTC. REPEAT the self-test. |
| U2051 | One or More Calibration Files Missing or Corrupt | ABS Module | CALIBRATE the ABS module, follow the directions on the scan tool. CLEAR the DTCs. CARRY OUT the ABS module self-test. RETRIEVE and RECORD any DTCs. If DTC U2051 is retrieved again, INSTALL a new ABS module. REFER to Anti-Lock Brake System (ABS) Module . CLEAR the DTC. REPEAT the self-test. |