LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Sun and Shell Assembly - Disassembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sun and Shell Assembly - Disassembly: Assembly

    NOTE: The one-way clutch assembly must be assembled in a specific order.
  1. Assemble the one-way clutch.
    1. The lower cap lip must face up.
    2. The low one-way clutch outer race groove must face up.
    3. The low one-way clutch shoulder must face up.
    4. The upper cap lip must face down.
    2. Fig 1: One-Way Clutch Assembly Components
    GF0020307Courtesy of FORD MOTOR CO.
    CAUTION: The outer race must rotate counterclockwise. Make sure end caps are fully seated.
  2. Install the low one-way clutches as an assembly with the groove facing up.
    1. The groove in the one-way clutch outer race must face up.
    2. The one-way clutch outer race must rotate counterclockwise.
    3. Fig 2: Installing Low One-Way Clutches As Assembly With Groove Facing Up
    GF0020308Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals