Memory Positioning Module: Service and Repair

DRIVER SEAT MODULE (DSM)







Removal and Installation

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to the appropriate scan tool. This information needs to be downloaded into the new module once installed.

1. Upload the module configuration information from the driver seat module (DSM) into the scan tool.
2. Disconnect the battery.
3. Remove the driver seat.
4. Drill out the 2 rivets.
5. Disconnect the 4 electrical connectors and remove the DSM.
6. To install, reverse the removal procedure.
- Download the DSM configuration from the scan tool into the new DSM.