Inspection and Verification
This section provides step-by-step module configuration procedures. Carry out the programmable module installation (PMI) procedure in this article when another workshop manual section directs to carry out configuration or when DTCs from the list below are present:
DTC CHART
| DTC | Description | Source | Action |
|---|---|---|---|
| B2477 | Module Configuration Failure |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| B2477 | Module Configuration Failure |
|
REFER to Accessory Protocol Interface Module (APIM) Programming in this article. |
| B2900 | VIN mismatch |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| P0602 | Powertrain Control Module Programming Error |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| P0605 | Internal Control Module Read Only Memory (ROM) Error |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| P1635 | Tire/Axle Out of Acceptable Range |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| P1639 | Vehicle ID Block Corrupted, Not Programmed |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| U0300 | Internal Control Module Software Incompatibility |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| U2050 | No Application Present |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |
| U2050 | No Application Present |
|
REFER to Accessory Protocol Interface Module (APIM) Programming in this article. |
| U2051 | No Application Present |
|
CARRY OUT PMI. REFER to Programmable Module Installation in this article. |