Steering Angle Sensor Module (SASM) DTC List

DTC	Description	Action
B1317	Battery Voltage High	NOTE: Battery voltage above 16 volts will cause DTC B1317 to set. Verify battery and charging system condition prior to diagnosing this DTC. GO to PINPOINT TEST K .
B1318	Battery Voltage Low	NOTE: Battery voltage below 10 volts will cause DTC B1318 to set. Verify battery and charging system condition prior to diagnosing this DTC. GO to PINPOINT TEST K .
B1342	ECU is Faulted	NOTE: If other DTCs are present, REPAIR them before installing a new component. CLEAR the DTCs. CARRY OUT the SASM self-test. RETRIEVE the DTCs. If DTC B1342 is retrieved again, INSTALL a new SASM . REFER to STEERING ANGLE SENSOR MODULE (SASM) . CLEAR the DTCs. REPEAT the self-test.
U0155	Lost Communication with Instrument Panel Cluster	REPAIR all other DTCs first. If DTC U0155 is still present, REFER to MODULE COMMUNICATIONS NETWORK to diagnose the HS-CAN bus.
U2050	No Application Present	CLEAR the DTCs. CARRY OUT the SASM self-test. If DTC U2050 is retrieved again, INSTALL a new SASM . REFER to STEERING ANGLE SENSOR MODULE (SASM) . CLEAR the DTC. REPEAT the self-test.