Front Controls Interface Module (FCIM)
FRONT CONTROLS INTERFACE MODULE (FCIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B00D5:01 | Restraint System Passenger Disable Indicator: General Electrical Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT 10 seconds. REPEAT the self-test. If Diagnostic Trouble Code (DTC) B00D5:01 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| B113C:11 | Hazard Switch Illumination: Circuit Short To Ground | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT 10 seconds. REPEAT the self-test. If Diagnostic Trouble Code (DTC) B113C:11 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| B1202:01 | Restraint System Passenger Enable Indicator: General Electrical Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT 10 seconds. REPEAT the self-test. If Diagnostic Trouble Code (DTC) B1202:01 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Module: No Sub Type Information | REFER to DIAGNOSTIC ROUTINE R . |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | REFER to DTC CHART: INSTRUMENT PANEL CLUSTER (IPC) to RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the Instrument Panel Cluster (IPC). |
| U2013:63 | Switch Pack: Circuit / Component Protection Time-Out | REFER to DIAGNOSTIC ROUTINE O . |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | Diagnostic Trouble Code (DTC) U201A:51 sets when the Front Controls Interface Module (FCIM) calibration is missing or corrupted. The INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT 10 seconds. REPEAT the self-test. If Diagnostic Trouble Code (DTC) U3000:41 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT 10 seconds. REPEAT the self-test. If Diagnostic Trouble Code (DTC) U3000:42 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | REFER to DIAGNOSTIC ROUTINE W . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | REFER to DIAGNOSTIC ROUTINE X . |