Accessory Protocol Interface Module (APIM)
ACCESSORY PROTOCOL INTERFACE MODULE (APIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B1201:1C | Steering Wheel Audio Switch Pack 2: Circuit Voltage Out of Range | Go to PINPOINT TEST I . |
| B1201:63 | Steering Wheel Audio Switch Pack 2: Circuit/Component Protection Time-Out | Go to PINPOINT TEST I . |
| B1252:04 | USB Port: System Internal Failure | Go to PINPOINT TEST H . |
| B1252:11 | USB Port: Circuit Short to Ground | Go to PINPOINT TEST H . |
| B1D79:01 | Microphone Input: General Electrical Failure | Go to PINPOINT TEST I . |
| U0100:00 | Lost Communication With ECM /PCM "A": No Sub Type Information | Go to PINPOINT TEST Z . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Go to PINPOINT TEST P . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | Go to PINPOINT TEST AA . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC ): No Sub Type Information | Go to PINPOINT TEST U . |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | Go to PINPOINT TEST AB . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | Go to PINPOINT TEST X . |
| U0255:00 | Lost Communication With Front Display Interface Module: No Sub Type Information | Go to PINPOINT TEST R . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the Accessory Protocol Interface Module (APIM) or Body Control Module (BCM). |
| U0423:00 | Invalid Data Received From Instrument Panel Control Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Instrument Panel Cluster (IPC). |
| U046B:00 | Invalid Data Received From Global Positioning System Module: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Global Positioning System Module (GPSM). |
| U0485:00 | Invalid Data Received From Radio: No Sub Type Information | RETRIEVE and FOLLOW other DTCs present in the APIM or Audio Control Module (ACM). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | PROGRAM the APIM . Refer to the Programmable Module Installation (PMI) procedure in MODULE CONFIGURATION . TEST the system for normal operation. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | PROGRAM the APIM . Refer to the PMI procedure in MODULE CONFIGURATION . TEST the system for normal operation. |
| U3000:04 | Control Module: System Internal Failure | INSTALL a new APIM . Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this information. TEST the system for normal operation. |
| U3000:41 | Control Module: General Checksum Failure | INSTALL a new APIM . Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this information. TEST the system for normal operation. |
| U3000:42 | Control Module: General Memory Failure | INSTALL a new APIM . Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) in this information. TEST the system for normal operation. |
| U3000:88 | Control Module: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go to PINPOINT TEST AC . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | Go to PINPOINT TEST AD . |