Front Control/Display Interface Module (FCDIM)
FRONT CONTROL/DISPLAY INTERFACE MODULE (FCDIM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Action |
|---|---|---|
| B10BD:11 | Multifunctional Switch: Circuit Short to Ground | Go to PINPOINT TEST D . |
| B10BD:13 | Multifunctional Switch: Circuit Open | Go to PINPOINT TEST D . |
| B10BD:23 | Multifunctional Switch: Signal Stuck Low | Go to PINPOINT TEST D . |
| U0010:88 | Medium Speed CAN Communication Bus: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK . |
| U0074:88 | Control Module Communication Bus "B" Off: Bus Off | Refer to MODULE COMMUNICATIONS NETWORK . |
| U1A00:00 | Private Communication Network: No Sub Type Information | Go to PINPOINT TEST Y . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Go to PINPOINT TEST P . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | Go to PINPOINT TEST U . |
| U0193:00 | Lost Communication With "Digital Audio Control Module A": No Sub Type Information | Go to PINPOINT TEST X . |
| U0423:68 | Invalid Data Received From Instrument Panel Cluster Control Module: Event Information | RETRIEVE and FOLLOW other DTCs present in the FCDIM or IPC . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | PROGRAM the FCDIM . Refer to the Programmable Module Installation (PMI) procedure in MODULE CONFIGURATION . TEST the system for normal operation. |
| U3000:00 | Control Module: No Sub Type Information | INSTALL a new FCDIM . Refer to FRONT CONTROLS/DISPLAY INTERFACE MODULE (FCDIM) in this information. TEST the system for normal operation. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | Go to PINPOINT TEST AE . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | Go to PINPOINT TEST AF . |