DTC Chart

NOTE: Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground.

Continuous Memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.

DTC CHART

DTC	Description	Source	Action
B2477	Module Configuration Failure	Front Display Interface Module (FDIM) Smart Junction Box (SJB)	Carry out Programmable Module Installation (PMI). Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0315	Crankshaft Position System Variation Not Learned	PCM	Using the scan tool, Carry out the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.
P0602	Powertrain Control Module Programming Error	PCM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P0605	Internal Control Module Read Only Memory (ROM ) Error	PCM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U0300	Internal Control Module Software Incompatibility	PCM Restraints Control Module (RCM)	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U201A:51	Control Module Main Calibration Data: Not Programmed	Audio Control Module (ACM) Front Controls Interface Module (FCIM)	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2050	No Application Present	ABS module FDIM Occupant Classification System Module (OCSM) SJB	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2051	One or More Calibration Files Missing/Corrupt	ABS module FDIM OCSM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100:00	Initial Configuration Not Complete: No Sub Type Information	ACM Power Steering Control Module (PSCM) RCM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2100:00	Initial Configuration Not Complete: No Sub Type Information	Accessory Protocol Interface Module (APIM)	Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2100:55	Initial Configuration Not Complete: Not Configured	Body Control Module B (BCM-B) Instrument Panel Cluster (IPC)	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101:00	Control Module Configuration Incompatible: No Sub Type Information	APIM	Carry out APIM programming. Refer to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING in this service information.
U2101:00	Control Module Configuration Incompatible: No Sub Type Information	* ACM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U2101:56	Control Module Configuration Incompatible: Invalid/Incompatible Configuration	IPC	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.
U3002:62	Vehicle Identification Number: Signal Compare Failure	RCM	Carry out PMI . Refer to PROGRAMMABLE MODULE INSTALLATION (PMI) in this service information.