Inspection and Verification

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

This section provides step-by-step module configuration procedures. Carry out the Programmable Module Installation when another workshop manual section directs to carry out configuration or when DTCs from the below list are present:

DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B2477	Module Configuration Failure	Anti-lock brake system (ABS) module Instrument cluster Restraints control module (RCM) Smart junction box (SJB)	CARRY OUT PMI. REFER to Programmable Module Installation .
P0602	Powertrain Control Module Programming Error	Powertrain control module (PCM)	CARRY OUT PMI. REFER to Programmable Module Installation .
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0300	Internal Control Module Software Incompatibility	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0301	Software Incompatibility with Engine/Powertrain Control Module	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	Instrument cluster Occupant classification sensor module RCM SJB Four wheel drive (4WD) control module	CARRY OUT PMI. REFER to Programmable Module Installation .
U2051	One or More Calibration Files Missing / Corrupt	Occupant classification sensor module RCM	CARRY OUT PMI. REFER to Programmable Module Installation .