Communications Network
COMMUNICATION NETWORK DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Action |
|---|---|---|---|
| U0001:88 | High Speed CAN Communication Bus: Bus Off | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0100 | Lost Communication With ECM /PCM | IC | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0100:00 | Lost Communication With ECM /PCM "A": No Sub Type Information | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST A . |
| U0100:88 | Lost Communication With ECM /PCM "A": Bus Off | Speech Recognition Module (SRM) | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U0121 | Lost Communication With Anti-Lock Brake System (ABS) Control Module | Instrument Cluster (IC) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST B . |
| U0125:00 | Lost Communication With Multi-Axis Acceleration Sensor Module: No Sub Type Information | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0125:88 | Lost Communication With Multi-Axis Acceleration Sensor Module: Bus Off | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0126:00 | Lost Communication With Steering Angle Sensor Module: No Sub Type Information | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0126 | Lost Communication With Steering Angle Sensor Module | IC | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0127 | Lost Communication With Tire Pressure Monitor Module | IC | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST I . |
| U0140 | Lost Communication With Body Control Module (GEM ) | Audio Control Module (ACM) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST J . |
| U0146 | Lost Communication With Gateway | Generic Electronic Module (GEM) | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0151 | Lost Communication With Restraints Control Module | GEM IC Occupant Classification System Module (OCSM) |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST H . |
| U0154 | Lost Communication With Restraints Occupant Classification System Module (OCS ) | RCM | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST G . |
| U0155 | Lost Communication With Instrument Panel Cluster (IC ) Module | ACM GEM RCM Tire Pressure Monitoring System (TPMS) module |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IC ) Module: No Sub Type Information | ABS module | CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST C . |
| U0238 | Lost Communication With Digital Audio Control Module "D" (DSP ) | ACM IC |
CLEAR the DTC. REPEAT the network test with the scan tool. If the DTC returns, GO to PINPOINT TEST F . |
| U0401:00 | Invalid Data Received from ECM /PCM A: No Sub Type Information | ABS module | RETRIEVE and FOLLOW the DTCs from the PCM. |
| U0402:00 | Invalid Data Received from TCM : No Sub Type Information | ABS module | RETRIEVE and FOLLOW the DTCs from the PCM. |
| U0428:00 | Invalid Data Received from Steering Angle Sensor Module: No Sub Type Information | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0428:41 | Invalid Data Received from Steering Angle Sensor Module: General Checksum Failure | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0428:61 | Invalid Data Received from Steering Angle Sensor Module: Signal Calculation Failure | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0428:62 | Invalid Data Received from Steering Angle Sensor Module: Signal Compare Failure | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U0428:64 | Invalid Data Received from Steering Angle Sensor Module: Signal Plausibility Failure | ABS module | REFER to ANTI-LOCK BRAKE SYSTEM - VEHICLE DYNAMIC SYSTEM article. |
| U1900 | CAN Communication Bus Fault-Receive Error | ABS module | GO to SYMPTOM CHART for module that failed network test. |
| U2012 | Communication Bus Error (Non SCP ) | ABS module | The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U2023 | Fault Received From External Node | IC TPMS module |
The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2196 | Invalid 'Engine RPM' Data | IC | The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2197 | Invalid 'Vehicle Speed' Data | IC | The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2198 | Invalid 'Fuel Pulse' Data | IC | The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2199 | Invalid 'Engine Coolant Temperature' Data | IC | The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2200 | Invalid 'ODO Count' Data | IC | The module had an invalid network input/message from another module. RETRIEVE and FOLLOW the non-network DTCs from other modules. REFER to MULTIFUNCTION ELECTRONIC MODULE article. |
| U2510 | CAN Invalid 'Vehicle Security' Data | IC | REFER to ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) article. |
| U2511 | CAN Data Mis-Match (Receive Data Does Not Match Expected) | IC | REFER to ANTI-THEFT SYSTEM - PASSIVE ANTI-THEFT SYSTEM (PATS) article. |