Starting System: Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 rpm |
| Starter motor maximum load current draw | 800 amps |
| Starter circuit maximum voltage drop (engine at normal operating temperature) | 0.5 volt |
| Starter motor no load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Ground wire nut (2.5L) | 18 | - | 159 |
| Ground wire nut (3.0L) | 18 | - | 159 |
| RH splash shield bolts | 9 | - | 80 |
| Starter motor solenoid battery cable nut | 12 | - | 106 |
| Starter motor solenoid wire nut | 5 | - | 44 |
| Starter motor stud bolts (2.5L) | 35 | 26 | - |
| Starter motor stud bolts (3.0L) | 27 | 20 | - |