LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Escape XLS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Configuration System >> Diagnosis And Testing >> Module Configuration >> Inspection and Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection and Verification

This service information provides step-by-step module configuration procedures. Carry out the Programmable Module Installation (PMI) procedures in this service information when another appropriate service information directs to carry out configuration or when DTCs from the below list are present:

NOTE: Some modules on this vehicle utilize a 5-character DTC followed by a 2-character failure-type code. The failure-type code provides information about specific fault conditions such as opens, or shorts to ground. Continuous memory DTCs have an additional 2-character DTC status code suffix to assist in determining DTC history.
DTC CHART

DTC Description Source Action
B2477 Module Configuration Failure
  • ABS module (without Hybrid)
  • Audio Front Control Module (ACM) (without navigation)
  • HVAC module (without Hybrid)
  • Front Display Interface Module (FDIM)
  • Instrument Cluster (IC)
  • Power Steering Control Module (PSCM)
  • Smart Junction Box (SJB) (without Hybrid)
CARRY OUT Programmable Module Installation (PMI). REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
B2900 VIN Mismatch
  • ABS module (without Hybrid)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0602 Powertrain Control Module Programming Error
  • PCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P0605 Internal Control Module Read Only Memory (ROM) Error
  • PCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1635 Tire/Axle Out of Acceptable Range
  • PCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
P1639 Vehicle ID Block Corrupted, Not Programmed
  • PCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300 Internal Control Module Software Incompatibility
  • Battery Control Module - High Voltage Traction Battery (BCM-HVTB)
  • HVAC module (without Hybrid)
  • PCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:00 Internal Control Module Software Incompatibility: No Sub Type Information
  • Restraints Control Module (RCM)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U0300:51 Internal Control Module Software Incompatibility: Not Programmed
  • ABS module (Hybrid)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U201A:51 Control Module Main Calibration Data: Not Programmed
  • ACM (with navigation)
  • Front Controls Interface Module (FCIM)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2050 No Application Present
  • 4X4 control module
  • ABS module (without Hybrid)
  • ACM (without navigation)
  • BCM-HVTB
  • HVAC module (without Hybrid)
  • FDIM
  • IC
  • Occupant Classification System Module (OCSM)
  • SJB
  • Transmission Control Module (TCM)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2051 One or More Calibration Files Missing/Corrupt
  • 4X4 control module
  • ACM (without navigation)
  • HVAC module (without Hybrid)
  • FDIM
  • OCSM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • ACM (with navigation)
  • ABS module (Hybrid)
  • RCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • Accessory Protocol Interface Module (APIM)
CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2100:56 Initial Configuration Not Complete: Invalid/Incompatible Configuration
  • ABS module (Hybrid)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • ACM (with navigation)
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • APIM
CARRY OUT APIM programming. REFER to ACCESSORY PROTOCOL INTERFACE MODULE (APIM) PROGRAMMING .
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information
  • RCM
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3000:46 Control Module: Calibration/Parameter Memory Failure
  • RCM
INSTALL a new RCM. REFER to SUPPLEMENTAL RESTRAINT SYSTEM article. CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .
U3002:62 Vehicle Identification Number: Signal Compare Failure
  • ABS module (Hybrid)
  • RCM
CARRY OUT PMI. REFER to PROGRAMMABLE MODULE INSTALLATION (PMI) .