Component testing procedure
COMPONENTS TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these | A good switch will indicate |
|---|---|---|---|
| Washer switch circuit | 10 and 15 | On | Closed circuit |
| Rest | Open circuit | ||
| Wiper switch circuit | 9 and 15 | Off | Open circuit |
| High | Closed circuit | ||
| Low | Open circuit | ||
| 11 and 15 | Off | Open circuit | |
| High | Open circuit | ||
| Low | Open circuit | ||
| 12 and 15 | Off | Open circuit | |
| High | Closed circuit | ||
| Low | Closed circuit | ||
| 15 and 16 | Off | Open circuit | |
| High | Closed circuit | ||
| Low | Closed circuit | ||
| Intermittent wiper circuit | 15 and 16 | Interval 1 | Open circuit |
| Interval 2 | Open circuit | ||
| Interval 3 | Open circuit | ||
| Interval 4 | Closed circuit | ||
| Interval 5 | Closed circuit | ||
| 11 and 15 | Interval 1 | Open circuit | |
| Interval 2 | Closed circuit | ||
| Interval 3 | Closed circuit | ||
| Interval 4 | Closed circuit | ||
| Interval 5 | Open circuit | ||
| 12 and 15 | Interval 1 | Closed circuit | |
| Interval 2 | Closed circuit | ||
| Interval 3 | Open circuit | ||
| Interval 4 | Open circuit | ||
| Interval 5 | Open circuit |