Turn Signal Switch: Service and Repair

Steering Column Multifunction Switch

Exploded View










Removal

1. Remove the steering column shrouds. REFER to Steering Column Shroud .

2. Turn the steering wheel 90 degrees to the left.

3. If equipped, remove the brake pedal adjust switch. REFER to Pedal Adjust Switch .

4. Remove the screw(s) and the multifunction switch.

Installation

1. Position the multifunction switch and install the screw(s).
- Tighten to 1 Nm (9 lb-in).

2. If equipped, install the brake pedal adjust switch. REFER to Pedal Adjust Switch .

3. Install the steering column shrouds. REFER to Steering Column Shroud .