Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Window control switches | 2 and 1 | Up | Closed circuit |
| 6 and 1 | Open circuit | ||
| 2 and 7 | Open circuit | ||
| 3 and 7 | Closed circuit | ||
| 2 and 7 | Down | Closed circuit | |
| 3 and 7 | Open circuit | ||
| 2 and 1 | Open circuit | ||
| 6 and 1 | Closed circuit |