Component testing procedure
COMPONENT TESTING PROCEDURE CHART
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Switch lock | 3 and 7 | Lock Off | Closed circuit |
| Lock On | Open circuit | ||
| Left front window circuit | 3 and 5 | Up | Closed circuit |
| 3 and 12 | Down | Closed circuit | |
| 3, 5 and 12 | One-Touch Up/Down | Closed circuit | |
| Right front window circuit | 3 and 11 | Up | Closed circuit |
| 3 and 10 | Down | Closed circuit | |
| Left rear window circuit | 3 and 6 | Up | Closed circuit |
| 3 and 14 | Down | Closed circuit | |
| Right rear window circuit | 3 and 13 | Up | Closed circuit |
| 3 and 2 | Down | Closed circuit |