LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2012 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 170 (Module Configuration System) >> Diagnosis And Testing >> Module Configuration >> Principles of Operation >> Definition of Terms >> Calibration Update
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Calibration Update

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.

Calibration update is used to install a new calibration and strategy into a module.

A calibration update should be carried out only upon notification (such as a Technical Service Bulletin [TSB]). Also, if a module sets DTC U2050, this indicates no application is present and reflashing of software application is required. If a module sets DTC U2051, this indicates no calibration is present and reflashing of calibration is required.

NOTE: If calibration fails when calibrating the DSM, disconnect the vehicle battery, wait 1 minute, connect the battery and complete the calibration update.
scientia non olet · About LEMON Manuals