Module Communications Network DTCS: GWM
| DTC | Description | Action |
|---|---|---|
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure as directed by the diagnostic scan tool. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION (418-01 Module Configuration, Description and Operation). If there have been no recent service actions, INSTALL a new GWM . REFER to: GATEWAY MODULE A (GWM) (418-00 Module Communications Network, Removal and Installation). |
| U3000:44 | Control Module: Data Memory Failure | PERFORM a GWM
self-test. If DTC
U3000:44 is retrieved, INSTALL a new GWM
. REFER to: GATEWAY MODULE A (GWM) (418-00 Module Communications Network, Removal and Installation). If DTC U3000:44 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:45 | Control Module: Program Memory Failure | PERFORM a GWM
self-test. If DTC
U3000:45 is retrieved, INSTALL a new GWM
. REFER to: GATEWAY MODULE A (GWM) (418-00 Module Communications Network, Removal and Installation). If DTC U3000:45 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |