Occupant Classification System Module (OCSM)
| DTC | Description | Action |
|---|---|---|
| B0061:11 | Passenger Seatbelt Tension Sensor: Circuit Short To Ground | REFER to: PINPOINT TEST - DTC: B0061:11, B0061:12, B0061:13, B0061:1C, AND B0061:49 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:12 | Passenger Seatbelt Tension Sensor: Circuit Short To Battery | REFER to: PINPOINT TEST - DTC: B0061:11, B0061:12, B0061:13, B0061:1C, AND B0061:49 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:13 | Passenger Seatbelt Tension Sensor: Circuit Open | REFER to: PINPOINT TEST - DTC: B0061:11, B0061:12, B0061:13, B0061:1C, AND B0061:49 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:1C | Passenger Seatbelt Tension Sensor: Circuit Voltage Out of Range | REFER to: PINPOINT TEST - DTC: B0061:11, B0061:12, B0061:13, B0061:1C, AND B0061:49 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:49 | Passenger Seatbelt Tension Sensor: Internal Electronic Failure | REFER to: PINPOINT TEST - DTC: B0061:11, B0061:12, B0061:13, B0061:1C, AND B0061:49 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C0:11 | Passenger Seat Occupant Classification Sensor "A": Circuit Short to Ground | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:1A | Passenger Seat Occupant Classification Sensor "A": Circuit Resistance Below Threshold | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:49 | Passenger Seat Occupant Classification Sensor "A": Internal Electronic Failure | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C1:11 | Passenger Seat Occupant Classification Sensor "B": Circuit Short to Ground | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C1:12 | Passenger Seat Occupant Classification Sensor "B": Circuit Short to Battery | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C1:49 | Passenger Seat Occupant Classification Sensor "B": Internal Electronic Failure | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C2:11 | Passenger Seat Occupant Classification Sensor "C": Circuit Short to Ground | REFER to: PINPOINT TEST - DTC: B00C2:11 AND B00C2:12 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C2:12 | Passenger Seat Occupant Classification Sensor "C": Circuit Short to Battery | REFER to: PINPOINT TEST - DTC: B00C2:11 AND B00C2:12 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1193:00 | Crash Event Storage Full and Locked: No Sub Type Information | CLEAR the OCSM
Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC
B1193:00 returns, INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). REFER to: INSPECTION AND REPAIR AFTER A SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPLOYMENT (501-20B Supplemental Restraint System, General Procedures). |
| U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information | REFER to: PINPOINT TEST - DTC: U0100:00 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0151:00 | Lost Communication with Restraints Control Module: No Sub Type Information | REFER to: PINPOINT TEST - DTC: U0151:00 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub Type Information | CARRY OUT the PCM self-test. REFER to the PC/ED information or REFER to: ELECTRONIC ENGINE CONTROLS - HYBRID ELECTRIC VEHICLE (HEV) (303-14 Electronic Engine Controls - 2.0L Duratec - Hybrid (96kW/130PS), Diagnosis and Testing). |
| U3000:46 | Control Module: Calibration / Parameter Memory Failure | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:54 | Control Module: Missing Calibration | Using a diagnostic scan tool, CARRY OUT the OCS
Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS
Reset was not successful, VERIFY correct installation of the OCS
. VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC
U3000:54 is still present, INSTALL a new OCS
sensor. REFER to: OCCUPANT CLASSIFICATION SYSTEM (OCS) SENSOR (501-20B Supplemental Restraint System, Removal and Installation). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | REFER to: PINPOINT TEST - DTC: U3003:16 AND U3003:17 (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | REFER to: PINPOINT TEST - DTC: U3003:16 AND U3003:17 (501-20B Supplemental Restraint System, Diagnosis and Testing). |