LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2013 >> Escape S >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Removal

All engines 

  1. Wit the vehicle in NEUTRAL, position it on a hoist. Refer to JACKING & LIFTING .
  2. NOTE: PCM installation DOES NOT require new keys or programming of keys, only a Parameter Reset of the Passive Anti-Theft System (PATS).

    Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. Refer to MODULE CONFIGURATION .

  3. Remove the LH fender splash shield. Refer to FRONT END BODY PANELS .

    1.6L GTDI, 2.0L GTDI engines 

  4. G08614005
  5. G08614006
  6. G08614007

    2.5L engine 

  7. G08614008
  8. G08614009
  9. G08614010
scientia non olet · About LEMON Manuals