| B1102:62 |
Trailer Stop Lamp: Signal Compare Failure |
GO to PINPOINT TEST X
. |
| C111A:11 |
Right Stop Lamp: Circuit Short To Ground |
GO to PINPOINT TEST X
. |
| C111A:12 |
Right Stop Lamp: Circuit Short To Battery |
GO to PINPOINT TEST X
. |
| C111B:11 |
Left Stop Lamp: Circuit Short To Ground |
GO to PINPOINT TEST X
. |
| C111B:12 |
Left Stop Lamp: Circuit Short To Battery |
GO to PINPOINT TEST X
. |
| C1126:11 |
Position Lamps: Circuit Short To Ground |
GO to PINPOINT TEST Y
. |
| C1126:12 |
Position Lamps: Circuit Short To Battery |
GO to PINPOINT TEST Y
. |
| U0010:00 |
Medium Speed CAN Communication Bus: No Sub Type Information |
REFER to
MODULE COMMUNICATIONS NETWORK
, No Medium Speed Controller Area Network (MS-CAN) - All Modules Not Responding. |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to PINPOINT TEST AB
. |
| U0300:00 |
Internal Control Module Software Incompatibility: No Sub Type Information |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in
MODULE CONFIGURATION
. If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE
. |
| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in
MODULE CONFIGURATION
. If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE
. |
| U2101:00 |
Control Module Configuration Incompatible: No Sub Type Information |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in
MODULE CONFIGURATION
. If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE
. |
| U3000:42 |
Control Module: General Memory Failure |
CLEAR the DTC. REPEAT the self-test. If the DTC returns, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE
. |
| U3000:51 |
Control Module: Not Programmed |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the scan tool. REFER to Programmable Module Installation (PMI) in
MODULE CONFIGURATION
. If there have been no recent service actions, INSTALL a new trailer module to correct the failure to retain configuration data. REFER to TRAILER MODULE
. |
| U3003:62 |
Battery Voltage: Signal Compare Failure |
GO to PINPOINT TEST W
. |