Generator - 2.0L GTDI: Installation
- Position the generator and hand-tighten the 3 bolts. Tighten in the sequence shown below.
- Tighten to 25 Nm (18 lb-ft).
-
- Tighten to 15 Nm (133 lb-in).
-
- Tighten to 17 Nm (150 lb-in).
- Install the upper Charge Air Cooler (CAC) pipe. For additional information, refer to Intake Air System Components - Exploded View in INTAKE AIR DISTRIBUTION SYSTEM AND INTAKE AIR FILTERING SYSTEM
.
-
- Connect the battery. For additional information, refer to
BATTERY, MOUNTING AND CABLES
.