| Air Cond Compressor Oil |
|
|
4.50 OZS. |
0.13 L |
PAG 46 |
|
S |
| Air Cond Refrigerant |
2.5L Eng |
|
1.50 LBS. |
0.68 KG |
R-134a |
|
S |
| Automatic Transmission Fluid |
|
|
9.00 QTS. |
8.51 L |
MOTORCRAFT Automatic Transmission Fluid MERCON LV |
Approximate dry fill capacity. Actual amount may vary during fluid changes.
Automatic Transmission that require MERCON LV should only use MERCON LV ATF. |
S |
| Brake Fluid |
|
|
N/A |
N/A |
MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. |
Use only MOTOCRAFT DOT 4 LV High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2 and ISO 4925 Class 6. Use of any fluid other than the recommended fluid may cause brake system damage.
Fill between "max" and "min" lines on reservoir. |
S |
| Engine Coolant |
2.5L Eng |
w/Eco Boost Engine |
9.20 QTS. |
8.7 L |
MOTORCRAFT Orange Antifreeze/Coolant Prediluted |
Add the coolant type originally equipped in the vehicle.
Indicates only approximate dry fill capacity. Some applications may vary. |
S |
| Engine Oil |
2.5L Eng |
w/Filter |
5.70 QTS. |
5.39 L |
MOTORCRAFT SAE 5W-20 Motor Oil or equivalent |
The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines.
DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system. |
S |
| Fuel Tank |
|
|
15.40 GALS. |
58.29 L |
|
|
S |
| Transfer Case Fluid |
|
Power Transfer Unit |
12.00 OZS. |
0.35 L |
MOTORCRAFT SAE 75W-140 Synthetic Rear Axle Lubricant |
|
S |
| Windshield Washer Fluid |
|
|
N/A |
N/A |
MOTORCRAFT Premium Windshield Washer Concentrate Fluid |
Follow the Manufacturer's Instructions for the mixture ratio. |
S |