Starting System: Specifications
TORQUE SPECIFICATIONS
| Description | Part Number | Torque |
|---|---|---|
| Ground wire nut | W506412 | 18 Nm (1 lb-in) |
| Starter motor solenoid battery cable nut | W706414 | 12 Nm (106 lb-in) |
| Starter motor solenoid wire nut | N805320 | 5 Nm (44 lb-in) |
| Starter motor stud bolts | W715721 | 48 Nm (35 lb-ft) |
| Transmission manual control lever nut | W711892 | 18 Nm (159 lb-in) |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Normal engine cranking speed | 200-250 Revolutions Per Minute (RPM) |
| Starting circuit maximum voltage drop (Engine at normal operating temperature) | 0.5 volt |
| Starter motor maximum load current draw | 800 amps |
| Starter motor no-load current draw | 60-80 amps |
| Starter motor normal load current draw | 130-190 amps |