LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Fiesta ST >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System DTCS (Am/Fm/Cd/Sync/Touchscreen) >> APIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Information System And Entertainment System DTCS (Am/Fm/Cd/Sync/Touchscreen): APIM

DTC INDEX

DTC Description Action
B108E:01 Display: General Electrical Failure GO to PINPOINT TEST Y
B116A:01 Handset Microphone: General Electrical Failure GO to PINPOINT TEST Q
B11BA:1C Steering Wheel Audio Switch Pack: Circuit Voltage Out of Range GO to PINPOINT TEST W
B11BA:63 Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out GO to PINPOINT TEST W
B1215:00 External Memory Card: No Sub Type Information GO to PINPOINT TEST Z
B1252:11 USB  Port: Circuit Short To Ground
B1252:13 USB  Port: Circuit Open
B12B8:11 USB  Port #2: Circuit Short To Ground
NOTE: This DTC  refers to USB  port #2 on the APIM  itself, which is not used.
  • INSPECT the APIM USB  port #2 for damage and REMOVE any debris.
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  B12B8:11 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
C1001:01 Vision System Camera: General Electrical Failure REFER to: PARKING AID .
See The Rear Video Is Inoperative.
U0151:00 Lost Communication With Restraints Control Module: No Sub Type Information GO to PINPOINT TEST AD
U0155:00 Lost Communication With Instrument Panel Cluster IPC  Control Module: No Sub Type Information GO to PINPOINT TEST AE
U0162:00 Lost Communication With Navigation Display Module: No Sub Type Information GO to PINPOINT TEST Y
U016A:00 Lost Communication With Global Positioning System Module: No Sub Type Information GO to PINPOINT TEST AG
U0184:00 Lost Communication With Radio: No Sub Type Information GO to PINPOINT TEST AH
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information GO to PINPOINT TEST AJ
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC  .
REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
U1A00:87 Private Communication Network: Missing Message GO to PINPOINT TEST C
U2017:45 Control Module Software #2: Program Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U2017:45 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U2017:51 Control Module Software #2: Not Programmed
U2017:52 Control Module Software #2: Not Activated
U2017:54 Control Module Software #2: Missing Calibration
U2100:00 Initial Configuration Not Complete: No Sub Type Information
  • This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM  .
    • If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the diagnostic scan tool.

      REFER to: SYNC MODULE [APIM] PROGRAMMING in General Procedures .

      See APIM PROGRAMMING .

    • If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information
  • This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM  .
    • If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the diagnostic scan tool.

      REFER to: SYNC MODULE [APIM] PROGRAMMING in General Procedures .

      See APIM PROGRAMMING .

    • If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:04 Control Module: System Internal Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:04 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:41 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:42 Control Module: General Memory Failure
  • CLEAR the Diagnostic Trouble Codes (DTCs).
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:42 is retrieved again, PERFORM the APIM  Hardware Test. Refer to APIM HARDWARE TESTING .
U3000:88 Control Module: Bus Off
NOTE: The module was unable to communicate on the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report this DTC  .
To avoid repeat network concerns: 
  • INSPECT for damaged or corroded wiring at the APIM  . Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
  • CLEAR the DTC  .
  • WAIT at least 10 seconds.
  • REPEAT the network test with the diagnostic scan tool.
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AM
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AN
scientia non olet · About LEMON Manuals