Front Display Interface Module (FDIM) - Without Navigation
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1318 | Battery Voltage Low | GO to PINPOINT TEST AC . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is still present, INSTALL a new Front Display Interface Module (FDIM). REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) . REPEAT the self-test. |
| B2477 | Module Configuration Failure | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) . |
| B2924 | Audio Button Stuck | CLEAR the DTCs. REPEAT the self-test. If DTC B2924 is still present, replace the FDIM. REFER to FRONT DISPLAY INTERFACE MODULE (FDIM) . REPEAT the self-test. |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to PINPOINT TEST AE . |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | GO to PINPOINT TEST AH . |
| U0164 | Lost Communication With HVAC Control Module - EATC | GO to PINPOINT TEST AK . |
| U0184 | Lost Communication With Radio (ACM) | GO to PINPOINT TEST AN . |
| U0197 | Lost Communication With Telephone Control Module | GO to PINPOINT TEST AP . |
| U2050 | No Application Present | REFER to MODULE CONFIGURATION . |
| U2051 | One or More Calibration Files Missing/Corrupt | REFER to MODULE CONFIGURATION . |