Removal & Installation
WARNING: This page is about the Transit-350 HD Base, 2D Cab Chassis, 3.2L Eng VIN V, which is a different variant/trim than selected.
TRANS ID - 6HP26, 6R60, 6R75, 6R80
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 3.2L Eng | 8.9 | C | ||
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: | ||||
| w/Three or Four Piece Driveshaft | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: FRONT PUMP SEAL: Remove & Replace: | ||||
| Front | 0.3 | B | ||
| Combination Procedure: OIL COOLER LINES: Flush: | ||||
| 0.3 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Includes: Programming. | 2.1 | C | ||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| 1.6 | B | |||