Module Configuration and Parameter Chart

The charts describe specific module configuration information:

Direct Configuration

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
APIM	7D0	Yes	Yes	No	None
ABS module	760	Yes	Yes	Inertial Measurement Unit (IMU) calibration	None
ACM	727	Yes	Yes	No	None
BCM	726	Yes	Yes	No	None
FCIM	7A7	No	No	No	None
FCDIM	7A5	Yes	Yes	No	None
GPSM	701	Yes	Yes	No	None
IPC	720	Yes	Yes	No	None
IPMA	706	Yes	Yes	No	None
IPMB	7B1	Yes	Yes	No	None
PAM	736	No	No	No	None
PCM	7E0	Yes	Yes	Yes	VIN
RCM	737	Yes	Yes	No	None
SASM	797	No	No	No	None
TBM	757	No	No	No	None
TRM	791	Yes	Yes	No	None
TCM (diesel engine)	7E1	Yes	Yes	No	None

Body Control Module (BCM) and Instrument Panel Cluster (IPC) Car Configuration

NOTE: The BCM and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect several modules. If the car configuration is changed in the BCM or IPC, an adaptive learning of the car configuration may be required in some modules (such as ABS module or RCM), depending on the changed parameter.

NOTE: On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.

Module Name	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Car Configuration Parameters
BCM	Yes (through Car Configuration Parameters.)	Yes	No	NOTE: Do not change car configuration parameters except those listed below. Trailer tow attachmentTrailer moduleTrailer module 7-position socketTail lamps level 1: Standard rear combination lampTail lamps level 2: LED rear combination lampLED rear tail lampsSeparate stop and turn tail lamps- bulbAutomatic lockingSpeed limitation105 kph (65 mph)113 kph (70 mph)121 kph (75 mph)Manual regeneration initiation (diesel)Manual regeneration with active regeneration inhibited (diesel)
IPC	Yes	Yes	No