Module Configuration and Parameter Chart

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
APIM	7D0	Yes	Yes	No	None
ABS module	760	Yes	Yes	IVD initialization EPB apply and release	Trailer sway assist
ACM	727	Yes	Yes	No	None
BCM	726	Yes	Yes	Ambient lighting calibration Rear view camera calibration	Remote start enable/disable Perimeter alarm Tire pressure
CCM	764	Yes	Yes	Radar horizontal and vertical alignment calibration	None
DSP	783	Yes	Yes	No	None
DACMC (integrated with ACM)	7D5	Yes	Yes	No	None
DC/ DC converter control module (Voltage Quality Module [VQM])	746	Yes	Yes	No	None
DDM	740	Yes	Yes	Windows initialization	None
DSM	744	Yes	Yes	No	None
SCME	776	Yes	Yes	No	None
FCDIM	7A5	Yes	Yes	No	None
FCIM	7A7	Yes	Yes	No	None
GWM	716	Yes	Yes	No	None
GPSM	701	Yes	Yes	No	None
HUD module	7B2	No	No	No	None
HSWM	714	Yes	Yes	No	None
IPC	720	Yes	Yes	No	Daytime running lamps control function Remote start feature Remote start - climate settings Driver seat Passenger seat Rear defrost Steering wheel
IPMA	706	Yes	Yes	Camera calibration	None
IPMB	7B1	Yes	Yes	Camera calibration	None
OCSM	765	No	No	OCSM re-zero	None
PAM (integrated with BCM)	736	Yes	Yes	No	None
PSCM	730	Yes	Yes	No	None
PCM	7E0	Yes	Yes	Misfire Monitor Neutral Profile Correction procedure	None
PDM	741	Yes	Yes	Windows initialization	None
RTM	751	Yes	Yes	No	None
RGTM	775	No	No	No	None
RCM	737	Yes	Yes	No	None
SODL	7C4	Yes	Yes	No	BLIS/CTA enable/disable Blockage enable/disable
SODR	7C6	Yes	Yes	No	BLIS/CTA enable/disable Blockage enable/disable
SASM	797	Yes	Yes	Adaptive steering wheel angle sensor trim adjustment	None
SECM	7C5	Yes	Yes	Adaptive steering wheel angle sensor trim adjustment Actuator trim procedure	None
SCCM	724	Yes	Yes	No	None
TRM	791	Yes	Yes	No	None