Front Controls Interface Module (FCIM)

DTC INDEX

DTC	Description	Action
B00D5:01	Restraint System Passenger Disable Indicator: General Electrical Failure	CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B00D5:01 is still present, INSTALL a new Front Controls Interface Module(FCIM). REFER to Front Controls Interface Module (FCIM) .
B113C:11	Hazard Switch Illumination: Circuit Short To Ground	CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B113C:11 is still present, INSTALL a new Front Controls Interface Module(FCIM). REFER to Front Controls Interface Module (FCIM) .
B1202:01	Restraint System Passenger Enable Indicator: General Electrical Failure	CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B1202:01 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U0155:00	Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information	GO to Pinpoint Test Z .
U0257:00	Lost Communication With Front Controls/Display Interface Module: No Sub Type Information	GO to Pinpoint Test AE .
U0423:00	Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information	REFER to Instrumentation, Message Center, and Warning Chimes to retrieve and follow DTCs present in the IPC.
U2013:63	Switch Pack: Circuit/Component Protection Time-Out	GO to Pinpoint Test G .
U3000:41	Control Module: General Checksum Failure	CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U3000:42	Control Module: General Memory Failure	CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U3003:16	Battery Voltage: Circuit Voltage Below Threshold	GO to Pinpoint Test AF .
U3003:17	Battery Voltage: Circuit Voltage Above Threshold	GO to Pinpoint Test AG .