Wiper System And Washer System DTCS
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1008:92 | Wiper Mode Switch: Performance or Incorrect Operation | DIAGNOSE the symptom. REFER to the Symptom Chart: Wipers and Washers . |
| B1051:92 | Front Washer Switch: Performance or Incorrect Operation | If the windshield washer is always on, INSTALL a new wiper/washer switch. Refer to: Steering Column Multifunction Switch RH
. If the windshield washer is inoperative, GO to Pinpoint Test H |
| B1052:92 | Rear Washer Switch: Performance or Incorrect Operation | If the rear washer is always on, INSTALL a new wiper/washer switch. Refer to: Steering Column Multifunction Switch RH
. If the rear washer is inoperative, CHECK the operation of the windshield washer. If the windshield washer is inoperative, GO to Pinpoint Test H If the windshield washer operates, INSTALL a new wiper/washer switch. Refer to: Steering Column Multifunction Switch RH . |
| B10AD:96 | Rain sensor: Component Internal Failure | INSTALL a new rain sensor. Refer to: Rain Sensor . |
| B11DC:92 | Rear Wiper Mode Switch: Performance or Incorrect Operation | GO to Pinpoint Test J |
| B1C45:24 | Front Wiper Park Position Switch: Signal Stuck High | DIAGNOSE all other BCM Diagnostic Trouble Codes (DTCs) first. If no other DTC is present, GO to Pinpoint Test G |
| B1C53:13 | Front Wiper Intermittent Data: Circuit Open | If the vehicle is not equipped with rain sensitive wipers, GO to Pinpoint Test B If the vehicle is equipped with rain sensitive wipers, GO to Pinpoint Test C |
| U0231:87 | Lost Communication With Rain Sensing Module: Missing Message | GO to Pinpoint Test C |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) . |