LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> GT >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Interior Lighting System DTCS
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Interior Lighting System DTCS

DTC Description Action
B1175:01 Driver Door Ajar Switch: General Electrical Failure If the courtesy lamps are inoperative, GO to Pinpoint Test A
If the courtesy lamps are always on, GO to Pinpoint Test B
B1176:01 Passenger Door Ajar Switch: General Electrical Failure If the courtesy lamps are inoperative, GO to Pinpoint Test A
If the courtesy lamps are always on, GO to Pinpoint Test B
B1313:11 Interior Lighting Output: Circuit Short To Ground GO to Pinpoint Test A
B1313:15 Interior Lighting Output: Circuit Short To Battery or Open If the courtesy lamps are inoperative, GO to Pinpoint Test A
If the courtesy lamps are always on, GO to Pinpoint Test B
B14AA:11 Demand Lamp Output: Circuit Short To Ground GO to Pinpoint Test C
B14AA:15 Demand Lamp Output: Circuit Short To Battery or Open GO to Pinpoint Test C
U1000:00 Solid State Driver Protection Active -Driver Disabled: No Sub Type Information The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The BCM cannot enable the output until the cause of the short is corrected. ADDRESS all other Diagnostic Trouble Codes (DTCs) first. After the cause of the concern is corrected, CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. For additional information on BCM Field Effect Transistor (FET) protection, REFER to: Module Controlled Functions - System Operation and Component Description .
U3000:49 Control Module: Internal Electronic Failure The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the BCM can withstand. The cause of the excessive current draw MUST be corrected before a new BCM is installed. ADDRESS all other Diagnostic Trouble Codes (DTCs) first. After the cause of the concern is corrected, INSTALL a new BCM. REFER to: Body Control Module (BCM) . For additional information on BCM Field Effect Transistor (FET) protection, REFER to: Module Controlled Functions - System Operation and Component Description .
For other BCM Diagnostic Trouble Codes (DTCs) - REFER to: Body Control Module (BCM) .