| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. INSTALL As-Built data from Professional Technician Society (PTS) following diagnostic scan tool instructions under Module Programming>As-Built. |
| U3000:44 |
RAM Error During Normal Operation: Data Memory Failure |
RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:44 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM)
. If DTC U3000:44 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:45 |
RAM Error During Normal Operation: Program Memory Failure |
RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:45 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM)
. If DTC U3000:45 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |
| U3000:49 |
RAM Error During Normal Operation: Internal Electronic Failure |
RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:49 is retrieved, INSTALL a new GWM. REFER to: Gateway Module A (GWM)
. If DTC U3000:49 is not retrieved, the module is operating correctly at this time. The concern may have been caused by an intermittent concern. |