Wipers And Washers System DTCS: SCCM
| DTC | Description | Action |
|---|---|---|
| B1008:09 | Wiper Mode Switch: Component Failure | GO to Pinpoint Test I |
| B1051:09 | Front Washer Switch: Component Failure | GO to Pinpoint Test J |
| B1131:02 | Wiper motor module: General Signal Failure | If the wipers are inoperative, or no symptom is present, GO to Pinpoint Test A If the wipers are always on, GO to Pinpoint Test D |
| B1131:08 | Wiper motor module: Bus Signal / Message Failure | GO to Pinpoint Test B |
| B1131:11 | Wiper motor module: Circuit Short To Ground | GO to Pinpoint Test B |
| B1131:49 | Wiper motor module: Internal Electronic Failure | GO to Pinpoint Test K |
| B1131:55 | Wiper motor module: Not Configured | CARRY OUT the PMI for the SCCM using As-Built data. |
| B1131:9A | Wiper motor module: Component or System Operating Conditions | DIAGNOSE the symptom present with the wiper system. REFER to Symptom Chart: Wiper and Washer . |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Steering Wheel and Column Electrical Components . |