LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls System - 2.5L DURATEC (125KW/170PS) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

  1. To install, reverse the removal procedure.
  2. NOTE: This step is only necessary when installing a new component.

    Upload the module information from the diagnostic tool to the module using the programmable modules installation routine. Refer to: Module Configuration - System Operation and Component Description . Use the General Equipment: Ford Diagnostic Equipment

  3. Reprogram the PATS. Carry out the parameter reset procedure. Refer to: Passive Anti-Theft System (PATS) Parameter Reset .
  4. After completing the repairs, perform the misfire monitor neutral profile correction procedure.
scientia non olet · About LEMON Manuals