Powertrain Control Module (PCM): Installation
-
- Tighten to 8 Nm (71 lb-in).
- Install the cowl panel grille. Refer to FRONT END BODY PANELS .
-
NOTE: If the PMI procedure was not successful in downloading the data from the vehicle's original PCM, then the oil life data of the vehicle is lost. If this occurs, and the oil life cannot be determined through service history or customer interview, it is recommended the vehicle engine oil and filter be changed and the oil change minder reset.
Restore the module configuration. Carry out the module configuration restore steps of the PMI procedure. Refer to MODULE CONFIGURATION .
- Reprogram the PATS. Carry out the Parameter Reset procedure. Refer to ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS), WITHOUT INTELLIGENT ACCESS (IA) .
- Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.