Normal Operation and Fault Conditions
With the ignition ON, the EPB module sends messages to the ABS module over the HS-CAN 2. If the ABS module does not receive these messages within the specified time frame, the ABS module sets DTCs. This can be due to a EPB module failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the EPB module, refer to Anti-Lock Brake System (ABS) and Stability Control article Description and Operation.
PPT SA - ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0128:00 | Lost Communication With Park Brake Control Module: No Sub Type Information | With the ignition ON, the EPB module sends messages to the ABS module over the HS-CAN2. If the ABS module does not receive these messages within the specified time frame, the module sets a DTC. This can be due to a EPB module failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the EPB module, refer to Anti-Lock Brake System (ABS) and Stability Control article, Description and Operation. |