Removal & Installation
WARNING: This page is about the Edge SE, 4WD, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.0L Eng,4WD, w/Dynamic Suspension,w/Cooler | Includes: R&I Transfer Case Assembly. | 18.0 | C | |
| 2.0L Eng,4WD, w/Dynamic Suspension,w/o Cooler | Includes: R&I Transfer Case Assembly. | 17.7 | C | |
| 2.0L Eng,4WD, w/o Dynamic Suspension,w/Cooler | Includes: R&I Transfer Case Assembly. | 17.4 | C | |
| 2.0L Eng,4WD, w/o Dynamic Suspension,w/o Cooler | Includes: R&I Transfer Case Assembly. | 17.1 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.5 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Includes: Validation with use of Scan Tool. | 0.4 | C | ||
| Combination Procedure: OIL PUMP SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| 0.9 | C | |||