Information System And Entertainment System DTCS: Am/Fm/Cd/Sync: GPSM
| DTC | Description | Action |
|---|---|---|
| U0100:00 | Lost Communication with ECM/PCM "A": No Sub Type Information | GO to Pinpoint Test X |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test Y |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test Z |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub Type Information |
NOTE:
If no Diagnostic Trouble Codes (DTCs) are present in the PCM, DIAGNOSE the observable symptom. DIAGNOSE any Diagnostic Trouble Codes (DTCs) present in the PCM. REFER to ELECTRONIC ENGINE CONTROLS - 1.6L DURATEC-16V TI-VCT (88KW/120PS) - SIGMA
, ELECTRONIC ENGINE CONTROLS - 1.6L ECOBOOST (132KW/180PS) - SIGMA
Diagnosis and Testing
article. |
| U0422:00 | Invalid Data Received from Body Control Module: No Sub Type Information |
NOTE:
If no Diagnostic Trouble Codes (DTCs) are present in the BCM, DIAGNOSE the observable symptom. DIAGNOSE any Diagnostic Trouble Codes (DTCs) present in the BCM. REFER to: Body Control Module (BCM)
. |
| U0423:00 | Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information |
NOTE:
If no Diagnostic Trouble Codes (DTCs) are present in the IPC, DIAGNOSE the observable symptom. DIAGNOSE any Diagnostic Trouble Codes (DTCs) present in the IPC. REFER to: Instrumentation, Message Center and Warning Chimes
. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to an incorrect or incomplete GPSM configuration. Using a diagnostic scan tool, CARRY OUT the GPSM programming procedure. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to an incorrect or incomplete GPSM configuration. Using a diagnostic scan tool, CARRY OUT the GPSM programming procedure. |
| U3000:09 | Control Module: Component Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new FCDIM. REFER to: Global Positioning System Module (GPSM) . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new FCDIM. REFER to: Global Positioning System Module (GPSM) . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTC. WAIT at least 10 seconds. REPEAT the self-test. If the DTC is retrieved again, INSTALL a new FCDIM. REFER to: Global Positioning System Module (GPSM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AD |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AE |