| U0104:00 |
Lost Communication With Cruise Control Module: No Sub Type Information |
GO to Pinpoint Test B
. |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test C
. |
| U0405:68 |
Invalid Data Received From Cruise Control Module: Event Information |
This DTC sets when the Head Up Display (HUD) module receives invalid network data from the Cruise-Control Module (C-CM) with a faulted signal data input. RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U0422:68 |
Invalid Data Received From Body Control Module: Event Information |
This DTC sets when the HUD module receives invalid network data from the Body Control Module (BCM). RETRIEVE and REPAIR all non-network DTCs in the other modules on the network. |
| U210A:16 |
Temperature Sensor: Circuit Voltage Below Threshold |
GO to Pinpoint Test D
. |
| U210A:17 |
Temperature Sensor: Circuit Voltage Above Threshold |
GO to Pinpoint Test D
. |
| U3000:41 |
Control Module: General Checksum Failure |
CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is retrieved again, INSTALL a new HUD module. REFER to Head Up Display (HUD) Module
. |
| U3003:16 |
Battery Voltage: Circuit Voltage Below Threshold |
GO to Pinpoint Test E
. |
| U3003:1C |
Battery Voltage: Circuit Voltage Out of Range |
GO to Pinpoint Test F
. |