Module Programming

WARNING: This page is about a different car, the 2019 Ford Police Interceptor Utility and 2019 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Module reprogramming (also referred to as "flashing") is a scan tool process which updates the strategy/calibration in a module. During module programming, the IDS will read the current software levels within the module and compare this information with the IDS database. If there is an update, it will be displayed on the IDS screen.

Reprogramming a module with the same level of software does not improve module operation or repair a hardware failure. Module reprogramming is automatically carried out during Programmable Module Installation (PMI) when a later strategy/calibration is available.

Limit module reprogramming to circumstances where a published FSA, TSB or SSM procedure recommends doing so.

A module cannot communicate with other modules on the communication network while being reprogrammed. After the reprogramming process, clear any network communication Diagnostic Trouble Codes (DTCs) which may have been set in other modules.

Some modules are reprogrammed in coordination with other modules. Follow the IDS key cycling instructions carefully to avoid reprogramming errors, including failure of programming one or more of the modules.